When shopping on 2021-12-01, many people may not think of an infrared camera. But with the coming of winter (winter is coming), there may be no tools more important than infrared devices that should be on your list this season. If you double check and see what it can help you do, you will most likely put the thermal imaging device at the top of your shopping list yourself.

Thermal imaging cameras can see things that our human eyes cannot see. The following are three hidden dangers that most people face in winter, but it is easy to find and prevent them by using thermal imaging cameras.

Danger behind the wheel

As common as driving behavior, it is easy to forget the dangers people encounter on the road. However, even if mankind has made all the progress, there is not a year without traffic accidents. The fact is that road accidents are the most serious during the cold winter months.

Our findings will surprise you. Studies have shown that the worse the road weather conditions, the higher the risk of traffic accidents. A study of this type using Palm's probability method showed that the highest accident risk comes from icy rain and very slippery road conditions.

How thermal imaging cameras can help

Low visibility has tripled the number of traffic deaths. Nighttime, fog and rain are just some of the reasons for the increase in road accidents. Low-light conditions affected by the weather can damage the headlights of the vehicle, making it difficult for the driver to see.

However, thermal imaging cameras can allow drivers to see even in noisy environments. On the one hand, the thermal sensor can reach a distance of 3,000 feet, allowing the driver to see the situation ahead. By doing this, he can identify possible road hazards long before the road has problems.

Remember, even in total darkness, a thermal imager can help you see things clearly. Even in the absence of light, it can produce clear and reliable images. The same goes for fog and rain.

Thermal imagers can generate thermal images based on the difference in thermal radiation of objects in front of them. Although fog and rain may impair the ability of thermal imaging cameras to detect temperature differences, the device is a more reliable winter road risk assessment method than relying solely on the human eye.

Fire prevention

Cold weather does not seem to be suitable for a fire. But the fact is that they do. To make matters worse, the incidence of fires in winter is extremely high.

the reason is simple. When the weather outside gets colder, the need for warmth increases. This natural tendency can lead to disastrous results.

How thermal imaging cameras can help

Too often, overheating is a prelude to a fire. By detecting these hotspots before they become full-scale fires, thermal imaging cameras can greatly help fire prevention.

It doesn't matter whether it is an industrial fire, a forest fire or a household fire. Detecting the presence of thermal signatures higher than normal without direct contact with the object is very helpful to ensure that no fire will occur.

Therefore, preventive maintenance must be carried out in this case. But by using a thermal imager, the work of zeroing the hot spot becomes much easier.

The danger of damaged buildings

Winter provides a "perfect storm" for all harmful factors. With the coming of cold, moisture can be easily found from above. Or all the water can attack from below.

How thermal imaging cameras can help

In most cases, structural damage is invisible to the naked eye. Once it appears, it must mean bad news for you. Normally, when you can intuitively notice this kind of damage, this kind of damage will be too great.

Therefore, when you notice a crack in the wall or the gap between the floor and the wall or door can hardly be closed or opened, it may be too late. Restoring your building to its original condition can mean a lot of work.

Whether from above or below, abnormal moisture accumulation can weaken the integrity of your building. The important thing is that you take action before it is too late.

Fortunately, this is where thermal imaging cameras are particularly useful. This device is a powerful non-invasive method for monitoring and diagnosing the structural integrity of buildings. Therefore, thermal imaging camera technology has become the tool of choice for many top building inspectors today.

By using a thermal imager, you can spot problem areas early, so you can record and correct them without having to consider expensive repairs.

Some of the most common ways that thermal imaging cameras can help you cultivate the structural integrity of your building are:

Looking for moisture in the walls

Zero thermal bridge

Detect construction defects

Location leak

Locate the damaged hot water pipe

Identify holes in the roof

To be honest, there are many ways thermal imaging can help you this winter. In fact, you can prevent unnecessary disasters from breaking out in front of you. Therefore, you can hold the thermal imager for safety inspection.