Full-featured, high-quality thermal imagers can detect objects by emitting infrared rays, and have the advantages of high efficiency and good imaging effects, so they are used in all walks of life. However, due to the different characteristics and process requirements of each industry, the types of thermal imagers required for production equipment are also different. Let's take a look at how to correctly choose the model of thermal imager in different equipment.

1. For electrical equipment

Because the use environment of electrical equipment is very wide, there are not only equipment used in indoor high temperature environment, but also electrical equipment used outdoors in severe cold areas, so it is necessary to choose a thermal imager that can fully satisfy both high temperature and low temperature. In addition to the general electrical equipment, an imager equipped with a standard lens can be used, but if it is used for the measurement of long-distance and small targets, then it is necessary to choose a model with a high pixel and a telephoto lens. For electrical equipment with a small temperature difference, a model with a high degree of sensitivity to temperature should be selected.

2. For mechanical and electrical equipment

If it is a mechanical electromechanical device used in an outdoor low temperature environment, then when selecting a thermal imager, pay attention to selecting a model with a low temperature range that can reach the lowest temperature of the device, and if it is used to detect a short distance and a large target measurement Choose a spare wide-angle lens model; if it's a thermal imager that inspects sealed equipment, choose a model that can pretend to be an infrared window assembly.

3. For quality management equipment

For the thermal imager used for quality management, the appropriate model should first be selected according to the actual temperature, but if there is a need for continuous measurement at the management site, then the model that can be connected to an external power supply and video output function should be selected.

The above is the method for the correct selection of thermal imager models for various equipment introduced to you. Because only the correct selection of the appropriate model can fully meet the detection needs of various equipment, it can avoid the phenomenon of poor imaging results caused by the inability to meet various conditions. You should consult your dealer carefully to buy a Z-stable thermal imager